Jansen 3 Side Track Dumper – RD 1000

€10,169.48

The Jansen RD-1000 track dumper is a robust and powerful machine built to industrial standards.
This 3-side dumper is specifically designed for professional use, boasting a substantial 1,000 kg load capacity.

Description

The Jansen 3 Side Track Dumper – RD 1000 is powered by the high-performance Vanguard® engine with an electric starter, is an industrial-quality machine designed for professional use, boasting a remarkable 1,000 kg load capacity. Developed with years of experience, it stands out for its robust construction and features that set it apart from the competition.

Key Advantages:

– High-performance Vanguard® engine with electric starter
– Integrated cyclone air filter (exceptional replacement intervals of 600 hours)
– Efficient and economical operation
– High payload and compact dimensions
– Easy handling and intuitive control

Hydrostatic Drive Benefits:

– Continuously adjustable speed regulation
– Linear drive motion with high mechanical efficiency
– High torque
– Secure and fast-acting overload protection
– Very long service life
– Low wear, minimizing friction
– Able to set off from a fully laden standing start
– Low maintenance

The hydraulic drive, with air cooling, powers a cylinder for raising and lowering the skip, which can be tipped to three sides. The quick and efficient lifting and lowering process, even when loaded with a 1,000 kg capacity, makes it ideal for construction sites. Its ability to navigate through almost any doorway with its narrow width (approx. 80 cm) adds to its versatility, making it suitable for indoor use.

Technical Data

TECHNICAL DATA:

Engine Vanguard^® (Briggs&Stratton) 4-stroke engine, 14 hp, 10.4 kW
Fuel: regular petrol
Tank capacity: 6.1 litres
Starter: E-starter + pull starter
Motor with integrated cyclone air filter
Speed: max. 5 km/h
Drive: hydrostatic, 2 motors
Pump flow rate: 36 l/min
Gear pump, 160 bar
Load capacity: max. 1000 kg
Climbing power: 26 degrees
Track width: 180 mm
Track clamping mechanism: Yes
Skip dimensions: 103x67x46 cm (LxWxH)
Tipping of skip: Hydraulically to 3 sides
Ground clearance: 170 mm front, 140 mm rear
Driver's platform: foldable
Dimensions built up: 220x80x104 cm (LxWxH)
Dimensions packaging: 185x90x130 cm (LxWxH)
Total weight (dry): 590 Kg
Shipping weight: 605 Kg

Thanks to its especially robust construction, the RD-1000 is optimally suited for the most heavy-duty and complicated jobs. Where other track dumpers fail, the RD-1000 is only getting started! Its unique design, with a stable driver platform makes it possible for the operator to ride on-board comfortably. The platform can also be folded upward when it is not being used.

The interaction of a powerful hydraulic system and the 80 cm wide crawler track unit allows the Jansen RD-1000 to move on the most uneven of terrain with ease. The hydrostatic drive permits exact maneuvering, turning on the spot and steering in the tightest of spaces. You can even navigate gradients (up to 26 degrees / 50%) - make sure you watch our product video!

ENGINE POINTS TO NOTE

Note on the engine:
The engine features the exclusive TransportGuard™ system. By simply moving the 3-in-1 control to the STOP position, the engine ignition and fuel supply are switched off simultaneously. The engine therefore no longer has a conventional petrol tap!

You should allow approx. 30 minutes for the start-up. You need engine oil (approx. 1 litre 10W40 or 15W40) which is filled in via the large filler neck. Check the correct engine oil level with the dipstick!

IMPORTANT: The hydraulic oil level must also be checked before initial operation and topped up if necessary (HLP-46)! A hand grease gun is required to grease the cylinder. We are also happy to provide you with any necessary assistance on the phone.