Jansen Stump Grinder BSF-60T

€4,436.99

Our BSF-60T stump milling cutter is designed to attach to your tractor and be powered by the PTO shaft (inclusive). The base frame is fitted with three-point linkage and stable support feet.

Tractor power: min. 30-60 HP
PTO shaft rotation: 540 U/min.
Hydraulic connections: 2x double-acting
Milling swivel range: 60 cm
Swivel angle: 40 °
Blades: 20 pc.

The Jansen Stump Grinder BSF-60T stump milling cutter is designed to attach to your tractor and be powered by the PTO shaft (inclusive). The base frame is fitted with three-point linkage and stable support feet.

It is the perfect solution for removing stumps and stubs in all sizes and wood types and is handy whenever small hand grinders can’t manage!

The 20 shaping blades are made from hardened steel and are screwed on the 60cm large milling wheel. These can be replaced individually.

With a milling swivel range of 40 ° and a milling width of 60 cm, it effortlessly cleans up ingrained surfaces and removes tree roots up to a depth of 30 cm and a maximum height of 40 cm.

The milling head is vertically and horizontally swiveled with two hydraulic cylinders. The stump milling cutter is operated easily from the tractor cab.

The machine is built to be compatible with categories I and II on your tractor.

Note: The device is delivered well-packed. You should allow approx. 2 hours for initial assembly. The gearbox is dry and must be filled with oil (80W90, approx. 1 litre) before use.